SIIG, INC.

IDE PROFESSIONAL

  Data bus:                  16-bit ISA

  Size:                      Half-length, full height card

  Hard drive supported:      Two IDE (AT) interface drives

  Floppy drives supported:   Two 360KB, 720KB, 1.2MB, 1.44MB, or 2.88MB
                             drives

[Image]

                               CONNECTIONS

                    Function                             Location

  16-pin game port - internal                              CN1

  34-pin control cable connector - floppy drive            CN2

  40-pin IDE (AT) interface connector                      CN3

  4-pin connector - drive active LED                       JP1

  25-pin parallel port - external                           P1

  9-pin serial port - external                              S1

  10-pin serial port connector - internal                   S2

                        USER CONFIGURABLE SETTINGS

             » Function                    Location           Setting

  »   IDE (AT) interface enabled        JP2/pins 1 & 2         closed

  »   IDE (AT) interface disabled       JP2/pins 2 & 3         closed

  »   Floppy controller enabled         JP3/pins 1 & 2         closed

  »   Floppy controller disabled        JP3/pins 2 & 3         closed

  »   Game port enabled                 JP8/pins 1 & 2         closed

  »   Game port disabled                JP8/pins 2 & 3         closed

  »   Parallel port IRQ7 select        JP16/pins 1 & 2         closed

  »   Parallel port IRQ5 select        JP16/pins 2 & 3         closed

                        SERIAL PORT 1 CONFIGURATION

            » COM                     JP4                    JP5

  »        COM1 (3F8h)         pins 1 & 2 closed      pins 1 & 2 closed

  »        COM2 (2F8h)         pins 1 & 2 closed      pins 2 & 3 closed

  »        COM3 (3E8h)         pins 2 & 3 closed      pins 1 & 2 closed

  »         Disabled           pins 2 & 3 closed      pins 2 & 3 closed

                     SERIAL PORT 1 INTERRUPT SELECTION

   » IRQ     JP18    JP19   JP20    JP21    JP22    JP23    JP24    JP25

  »    4     open    open   open    open    open    open    2 & 3   open

  »   2/9    open    open   open    2 & 3   open    open    open    open

  »    3     open    open   open    open    open    open    open    2 & 3

  »    5     open    open   open    open    open    2 & 3   open    open

  »    7     open    open   open    open    2 & 3   open    open    open

  »   10     open    open   2 & 3   open    open    open    open    open

  »   11     open    2 & 3  open    open    open    open    open    open

  »   12     2 & 3   open   open    open    open    open    open    open

  Note: Pins designated are in the closed position.

                        SERIAL PORT 2 CONFIGURATION

            » COM                     JP6                    JP7

  »        COM2 (2F8h)         pins 1 & 2 closed      pins 1 & 2 closed

  »        COM1 (3F8h)         pins 1 & 2 closed      pins 2 & 3 closed

  »        COM4 (2E8h)         pins 2 & 3 closed      pins 1 & 2 closed

  »         Disabled           pins 2 & 3 closed      pins 2 & 3 closed

                     SERIAL PORT 2 INTERRUPT SELECTION

   » IRQ     JP18    JP19   JP20    JP21    JP22    JP23    JP24    JP25

  »    3     open    open   open    open    open    open    open    1 & 2

  »   2/9    open    open   open    1 & 2   open    open    open    open

  »    4     open    open   open    open    open    open    1 & 2   open

  »    5     open    open   open    open    open    1 & 2   open    open

  »    7     open    open   open    open    1 & 2   open    open    open

  »   10     open    open   1 & 2   open    open    open    open    open

  »   11     open    1 & 2  open    open    open    open    open    open

  »   12     1 & 2   open   open    open    open    open    open    open

  Note: Pins designated are in the closed position.

                    PARALLEL PORT I/O ADDRESS SELECTION

          » Address                   JP9                    JP10

  »           378h             pins 1 & 2 closed      pins 2 & 3 closed

  »           278h             pins 1 & 2 closed      pins 1 & 2 closed

  »           3BCh             pins 2 & 3 closed      pins 1 & 2 closed

  »         Disabled           pins 2 & 3 closed      pins 2 & 3 closed

                       PARALLEL PORT MODE SELECTION

              » Mode                      JP11                JP12

  »        EPP/Bi-directional           pins 1 & 2      pins 2 & 3 closed
                                         closed

  »            ECP & EPP                pins 1 & 2      pins 1 & 2 closed
                                         closed

  »               ECP                   pins 2 & 3      pins 1 & 2 closed
                                         closed

  »               SPP                   pins 2 & 3      pins 2 & 3 closed
                                         closed

                    PARALLEL PORT DMA CHANNEL SELECTION

       » Channel             JP13             JP14             JP15

  »      Disabled            open             open           pins 2 & 3
                                                              closed

  »          1            pins 1 & 2       pins 1 & 2        pins 1 & 2
                            closed           closed           closed

  »          3            pins 2 & 3       pins 2 & 3        pins 1 & 2
                            closed           closed           closed

  Note: DMA channel selection is only in ECP mode.